Home recording and general music post from the archived Yabb Recording Website Message Board. Some of the info here may be outdated but many of the audio recording and home studio tips are still good. Note: The only tags I made and attempt to convert are italics, bold, center and underline. So if you see some gibberish surrounded by brackets, just ignore it.
Recording Website Archived Yabb board Post
Febuary 2001 Yabb Message Board Archive
Subject: recording drums in mono
by Frodo | 05/07/01 at 01:25:22
Someone started this thread but I can't find it now. But I was wondering about some of your techniques. Wouldn't it be best to go ahead and mic everything like normal (kick, snare and 2 ohs) and then just track it to mono? Or could you use 2 mics, one about a foot off the ground pointed at the front of the kit and another about head high from behind?
Subject: Re: recording drums in mono
by BananaHead | 05/07/01 at 02:31:35
Well ya but "normal" is a tricky term.
You wouldn't want to use stereo overheads and combine them to mono, you'd just get cancellations problems and there would be no point. That's the point of mono, no stereo complications.
Ya the two mic thing you mentioned gets done. People use a condenser like a u47fet a few feet from the kick and then something over the drummers shoulder. Some people then put a third by the hat side or floor tom side, but then that's usually to add some stereo action.
Or you can just stick one mic 6 feet in front of the kit and call it a day. No phase problems with that one, that's for sure, and obviously it's mono. Gotta have a good room.
|