 Board Message |
I think I've got it! |
|
Board Message |
I think I've got it! |
[ Follow Ups ] [ Post Followup ] [ Active Message Board ] [ Archive Home Page ] Posted by KyleJ on April 14, 2000 at 11:24:52:
In Reply to: adat to Cakewalk posted by Casey on April 07, 2000 at 21:44:26:
First make sure you update ADAT Connect to v1.02 from Alesis' web site.
There are 3 different ways to get audio into Cakewalk...
1. Use the ADAT Connect program to pull audio off of the tape and into .WAV files. Then use them in CW.
2. Use CW to record directly off of the ADAT through the PCR. (They said to make the ADAT the Sync Master - CW9 has some problems in with being a Sync Master)
3. You can use the ADAT/ADATPCR combo to work like a Layla card. Pass analog into the ADAT and through the optical to the PC! It works!. And you can send audio from CW out the opposite direction. Although you can't monitor what's being recorded. (There are a few ways around this, but I'm not sure of any delays in the signal do to the A/D and D/A conversions.)
These archives brought to you by The Recording Forums
by Dan E. Monk. copyright © 2003