 Board Message |
|
Board Message |
[ Follow Ups ] [ Post Followup ] [ Active Message Board ] [ Archive Home Page ] Posted by Silent Bob on January 25, 2000 at 00:16:39:
In Reply to: Re: Direct to recorder posted by BananaHead on January 24, 2000 at 23:34:07:
I'd run directly to the D-80 if possible. But if you need compression, try to do it during tracking. The object is do all volume BOOSTING as early in the recording process as you can to keep the noise floor down. Compressing during tracking will also get you higher resolution because with the compression, you can get a hotter signal to the D-80. That's important b/c even though your machine has very good 20bit (or so I've read) converters, it only has 16 bit storage so you want the hottest signal you can get before the D-80.
These archives brought to you by The Recording Forums
by Dan E. Monk. copyright © 2003